All

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

APR Turbo Inlet System - EA888 Gen4 265-333ps MQB Evo Models Compatible Vehicles -Volkswagen- Golf Mk8- Audi S3 (8Y) The APR Turbo Inlet System is a comprehensive upgrade to your factory or modified intake system. To maximize performance addressing the restrictive components between the airbox and turbocharger are a top priority. It's common to individually upgrade these components, but doing so is not ideal as it mean sacrificing overall design for the sake of compatibility. This is why the APR system is one complete upgrade from the turbocharger to the intake airbox. We were able to increase the diameter as large as possible with the best geometry from the turbo to the intake airbox to promote the maximum amount of flow with the lowest pressure drop. The system starts at 80mm and can expand up to 88mm for larger airbox systems. On the Golf R we increased flow by over 30% at each measured inlet depression! This means the turbo doesn't have to work as hard, which translates to lower temperature, and improved performance. This system is compatible with the factory intake airbox, and works perfectly with an APR intake filter for those who prefer a "stealth" OE airbox upgrade. Over a 30% increase in flow, lower pressure drop, optimized performance over stock Full system addresses all restrictions between the turbocharger and airbox Wire-reinforced hose lined with fluorosilicone for oil and fuel resistance Billet DV connector Fits 80mm and 88mm airboxes Perfect upgrade for the factory airbox or upgraded “airbox only” intake systems Turbo inlet adapter is removable and can be modified for larger turbo setups

Read more less

This simple bolt-on modification is designed to maximise air flow, as it fits directly to the turbo and features a much larger diameter, freer flowing design compared to the more restrictive OEM elbow. Made from lightweight aluminium and finished in high-quality powder coat black finish, the elbow comes with new O-rings and is a direct replacement part that also enhances induction noise.  The kit also features a Pro Hoses silicone intake pipe in black, as well as jubilee clips.  Designed to work in conjunction with the original intake as well as our AIRTEC Motorsport induction kit in order to make the very most of the larger pipe work, the enlarged elbow removes the last restriction from the entire intake side.  Features: Larger internal diameter and improved flow to the turbo Increased flow for more power and enhanced induction noise  Fits both original intake and AIRTEC Motorsport indecution kit  Direct replacement part with simple installation  Made from lightweight aluminium construction Finished in high-quality powder coat black finish Pro Hoses silicone intake pipe included with jubilee clips Supplied with new O-rings and fitting instructions AIRTEC part no: ATMSVAG22

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically: - Your screws will never rust - You can select any colour you want! This kit is for the MK2 Puma (All Models), and it comes in 2 options Option 1. All Metal screws in Engine bay (Circled Yellow)Contents: 14x Washer - 14x Stainless steel screw. Locations: Headlights, Bumper Slam Panel & Air Feed Option 2. All screws above, Plus 6 Additional (Circled Red)Contents: 20x Washer - 20x Stainless steel screw. Locations: Headlights, Bumper Slam Panel, Air Feed, Wings & Scuttle Panel You've seen these on eBay for £7, So why buy from us you ask... Well, The ones on eBay come with M6 screws. We can assure you that these screws will not fit in your car. Also, our washers are made from a premium grade aluminium and anodized to last, Unlike their cheap counter parts. Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

Developed, designed, and influenced from our direct involvement with BTCC and success with the Hyundai i30N, we are proud to release an oil cooling solution for the Hyundai Kona N. This oil cooler radiator is lifted straight from our motorsport department, so we know that this product performs well, and has been proven in several race events and winning vehicles over the past years. The cores are durable enough to last full race seasons and are perfect for fast road and track use. The cooler has now also been utilised in both of our other Hyundai oil cooling solutions and cleverly redesigned for a 100% plug and play solution for the Kona N. During our time developing world leading products for the Kona N, we found a significant flaw with the vehicle, especially when tuned, just as we did with the I30N. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates. Rising oil temperatures will result in only one outcome: a reduction of sufficient lubrication of your engines internal components, which, in due course, can potentially lead to engine damage. We saw oil temperatures reduce significantly during the development of this product when locating the oil cooler heat exchanger at the front of the vehicle’s radiator grill, this allowed for superior air flow. FMOC14 is a must-have product for the keen driver to protect their vehicles longevity, and perform safely and reliably. Unlike many oil cooler kits on the market, FMOC14 keeps the factory oil to water cooler in position - this essentially doubles your engines oil cooling. This product is not to be confused with a universal oil cooler, FMOC14 has a laser cut aluminium bracket which makes for perfect fitment to the Kona N. The kit is completely bespoke for this vehicle, with perfect length braided oil lines and our intelligent sandwich plate design making for a straightforward installation. The oil cooler is also designed to be mounted in the most efficient way possible as shown in the diagram below. This is to avoid oil cavitation which can also in some cases lead to potential engine damage over a long period of time. Manufactured in Gloucester, UK, FMOC14 is made to the uppermost standard and is backed up by the Forge Motorsport lifetime warranty. The kit comes with the following:1x Forge Aluminium sandwich plate1x Twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x Oil lines 4x M6 Rubber Riv nuts1x M20x1.5 adaptor1x weather stripAll the fixings required and a comprehensive fitting guide

Read more less

Highlights: Increased performance (8bhp)Guaranteed for lifeComplete kit and instructions for ease of installationHand fabricated aluminium pipingAesthetically pleasing designPerfect with our inlet duct (FMINLD3)   fits:•    500•    595  - 145BHP  - Competizione 180BHP  - Trofeo 160BHP  -  Turismo 165BHP•    695  -  XSR Yamaha Limited Edition 165BHP  -  Rivale 180BHP The cold air feed is drawn in from the scuttle panel, this maximises the density charge of air entering the turbo intake. A perfect upgrade to compliment this is our Abarth specific inlet duct, FMINLD3. This combination of temperature and density gave us an 8bhp increase on our test cars as well as an incredible induction noise. It will put a smile on your face not only when you feel the power gains, but also when you open the bonnet and see this beautiful product sat in your engine bay. Our intakes/induction kits are a great and effective upgrade to your vehicle. This intake comes with a carbon fibre housing. To ensure we deliver the best quality products we can, and following the extensive design and development of our intake range, we enlist the services of one the world’s leading carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies, and aircraft wings! Our intakes maximise the density charge of cold air for increased performance, as well as give a great sound, and enhance the aesthetics of your engine bay. When it comes to the filtration part of the intakes, there is no point creating such an efficient system for it then to be restricted by the OEM hose and filter. Therefore, for the filters, we engage one of our partners and experts in filtration control, Pipercross or RamAir! Additional parts such as aluminium piping are hand fabricated and polished, and the hoses are fluorosilicone for maximum longevity. This kit for the Fiat 500/595/695 comes with everything you need for the installation. It uses a high flow filter, available in either a foam (FMPK371) or pleated option (FMINDF500RCP). The aluminium components are skilfully hand fabricated in our UK headquarters. 

Read more less

ENCLOSED MST-VW-MK888 This is a performance enhancing induction kit for the Volkswagen Golf MK8 GTi EA888 EVO4 245bhp. Features Improved throttle response Black powdercoated heat shield and inlet pipe Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated heat shield Red pleated filter Silicone inlet pipe Full fitting kit with easy step by step instructions AIRBOX & SCOOP MST-VW-MK99903 This is a performance enhancing induction kit for the EA888 Gen 3 VAG engines. For a full list of compatible vehicles please see fitment compatibility chart. This is a crosslinked Roto-Molded Polythylene version of the MST-VW-MK888 Features Improved throttle response Dyno results: max gains 12-14bhp (this may vary dependant on vehicle) Easy to maintain dry pleated filter Cold air straight to the turbo charger What Does It Do? This induction kit delivers increased air flow and induction noise over the standard restrictive air box. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black heat shield Black silicone inlet pipe Red dry pleated filter Turbo inlet elbow Black air scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2020+ VW Golf GTi (MK8) 2.0 TSI 2020+ AUDI A3 8Y 2.0 TSI 2020+ CUPRA LEON MK4 2.0 TSI 2020+ CUPRA FORMENTOR 2.0 TSI 2020+ SKODA OCTAVIA MK4 2.0 TSI

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

  As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Polo GTI AW model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Polo GTI AW model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the VW Polo GTI AW Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSVAG19

Read more less

As part of our expanding Hyundai platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the i20N model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified i20N owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper with the limited space available. As a result, our kit includes a bespoke oil cooler design with the mounting brackets welded into position to ensure the perfect fitment. The comprehensive package also includes high quality braided hose lines with Aerotec fittings and mounting brackets to route the lines, a CNC-machined sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features although minor drilling is required. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified i20N models. PLEASE NOTE: There is the option of either FOUR bolt or FIVE bolt oil modine/sandwich plates. If you car is a potential crossover (late 2022/early 2023) then we advise you check the one on your car.  2021 models: Five bolt2022 models: Five bolt2023 models: Four bolt2024 models: Four bolt  Features: Comprehensive kit designed specially for the i20N platform Four or Five bolt oil modine/sandwich plate Reduces temperatures on track and road Designed and developed in the UK Bespoke large capacity external oil cooler with built-in brackets  CNC-machined sandwich plate for the i20N model High-quality hoses and fittings Includes all fixtures and detailed fitting instructions AIRTEC part no: ATMSHYU11

Read more less

As part of our expanding Suzuki product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Swift Sport Boosterjet model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Swift Sport model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Suzuki Swift Sport Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSSUZ3  

Read more less

As part of our expanding Suzuki platform product range, AIRTEC Motorsport is proud to launch our external oil cooler kit for the Swift Sport Boosterjet, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Swift owners who struggle to maintain steady oil temperatures on track, or during fast road use. With huge experience in developing external oil cooler packages for a variety of modified track and road cars, and aware of the Swift’s oil cooling issues during heavy track use, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the grille with the limited space available.  As a result, our kit features bespoke laser-cut mounting brackets to ensure the perfect fitment of our 13-row AIRTEC Motorsport oil cooler. The comprehensive package also includes high-quality braided hose lines with Aerotec fittings, a sandwich plate and all fixtures and fittings, including detailed installation instructions. The kit is designed to integrate with the car’s existing features, although minor drilling is required to the inner plastic surround behind the bumper that cannot be seen.  Features: Comprehensive kit designed specifically for the Swift platform Reduces temperatures on track and road Designed and developed in the UK Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures  Features detailed fitting guide Registered Design Right number: Pending AIRTEC part no: ATMSSUZ1

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less